Fixed node satellite communication station “Centavr-NM-3” |
| Print | |
|
The station is located at a stationary location near the nodes and provides multiple signal communication up to 8-10 paths over “fixed node-to-mobile node”, “fixed node-to-ship” or “fixed node-to-fixed node” simultaneously.
Basic technical characteristics
| Name of parameter |
Value |
| Antenna diameter, m |
3,7 |
| Number of communication directions |
6 |
| Antenna tracking modes |
Programmed, manual or automatic satellite tracking |
| Communication data rate, Kbps |
4,8…2048 |
| Transmit EIRP (min), dBW |
RS65 |
| Maximum transmitter output (W) |
100 |
| G/T (relative to dB/K) |
21 |
| Available modulation types |
BPSK; QPSK, 8PSK, 16QAM |
| Available coding |
with convolution code (R = 1/2, 3/4, 7/8) |
| Available decoding |
Viterbi and Reed-Solomon decoding |
The station contains:
- Antenna with mounting post
- Hardware configuration (mounted in cabinet)
- Videoconferencing hardware
- Uninterruptible AC power supply
- Encoding hardware for signal security
Rate of information transmission in communication with:
- mobile facilities – from 4.8 to 512 kbps
- fixed node stations – from 4.8 to 2048 kbps
ÊAn extensive selection of earth station configurations provides efficient and high-quality duplex open and closed network telephone and facsimile communication, videoconferencing, data transmission and internet access through C-band transponders on the GSO satellites. Also, a variety of stations can be implemented in either X-band or Ku-band frequencies. |
Production 
